NETGEAR Smart MS510TXPP – switch – 8 ports – smart – rack-mountable

Each port automatically detects which speed is needed by the connected device and provides the adequate speed. As opposed to regular 10-Gigabit switches that will only provide 1-Gigabit connectivity to any device that require less than 10-Gigabit, the switch gives the exact speed required, with no downgrade. Also, the NETGEAR Multi-Gigabit switch ports can connect…

38,302.27
Indian rupee (₹) – INR
  • United States dollar ($) – USD
  • Indian rupee (₹) – INR
  • United Arab Emirates dirham (د.إ) – AED
Part#: MS510TXPP-100EUS
SKU: ms21709
Category: ,
Tags: ,

Description

Product details

NETGEAR Smart MS510TXPP

Overview

Each port automatically detects which speed is needed by the connected device and provides the adequate speed. As opposed to regular 10-Gigabit switches that will only provide 1-Gigabit connectivity to any device that require less than 10-Gigabit, the switch gives the exact speed required, with no downgrade. Also, the NETGEAR Multi-Gigabit switch ports can connect regular CAT5e Ethernet cables, without the need to upgrade to CAT6 wiring, therefore reducing wiring costs and hassle. Access, aggregation or collapsed core: you can now have your PCs, printers and routers/firewalls connected at 1G and aggregate Multi-Gigabit Ethernet devices on the same switch, all line-rate. 10G copper and fiber ports are ready for local servers and storage, or high-speed aggregation to your network core.

  • Switch
  • L3 Lite
  • smart
  • 4 x 10/100/1000 (PoE+) + 2 x 100/1000/2.5G/5G (PoE+) + 2 x 100/1000/2.5G (PoE+)

NETGEAR Smart MS510TXPP

switch – 8 ports – smart – rack-mountable

Specification

Device Type Switch – 8 ports – L3 Lite – smart
Enclosure Type Rack-mountable
Subtype 10 Gigabit Ethernet
Ports 4 x 10/100/1000 (PoE+) + 2 x 100/1000/2.5G/5G (PoE+) + 2 x 100/1000/2.5G (PoE+)
Power Over Ethernet (PoE) PoE+
PoE Budget 180 W
Performance Bandwidth: 78 Gbps ¦ Latency (10 Gbps): < 2.36 µs ¦ Latency (SFP+): < 2.6 µs ¦ Packet forwarding rate: 58 Mpps
Capacity LAG groups: 8 ¦ MAC addresses: 16000 ¦ ACL entries (ingress): 164 ¦ Virtual interfaces (VLANs): 256 ¦ RP/NDP table: 512 ¦ IPv4 routes (static): 32 ¦ IPv6 routes (static): 32 ¦ IGMP multicast groups: 512 ¦ ARP entries: 512 ¦ VLAN routing interfaces: 32 ¦ Jumbo frame size: 10000 ¦ DHCP snooping entries: 1000 ¦ Multicast groups: 512 ¦ Priority queues: 8
MAC Address Table Size 16K entries
Routing Protocol Static IP routing
Remote Management Protocol SNMP 1, SNMP 2, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 3, SNMP 2c
Features IGMP snooping, Syslog support, DoS attack prevention, port mirroring, DiffServ support, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, RSTP support, MSTP support, ACL support, QoS, Jumbo Frames support, DAI, LACP support, LLDP support, Energy Efficient Ethernet, CoS, 802.1x authentication, ToS, DSCP support, 1.5MB packet buffer, MAC and IP-based ACLs support, 1 fan, Voice VLAN, VLAN management, Guest VLAN, WRR, Auto VoIP, MAC lockdown, IPv6 management
Compliant Standards IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3an, IEEE 802.3az, ITU-T H.323, IEEE 802.3bz
Dimensions (WxDxH) 32.8 cm x 16.9 cm x 4.3 cm
Weight 1.9 kg
Localisation Europe
Manufacturer Warranty ProSAFE lifetime warranty

Additional information

brand

NETGEAR

Reviews

There are no reviews yet.

Be the first to review “NETGEAR Smart MS510TXPP – switch – 8 ports – smart – rack-mountable”

Your email address will not be published. Required fields are marked *